Shenzhen Rogin Medical Co., Ltd
Shenzhen Rogin Medical Co., Ltd Professional Manufacturer and supplier of dental instruments
Add to Cart
Diamond Material Rotary Dental Instruments Dental Diamond Burs FG for High Speed Handpiece
Quick Details
Feature
Model instructions
| TF | Taper Flat End |
| TR | Taper Round End |
| TC | Taper Conical End |
| FO | Flame Ogival End |
| SF | Straight Flat End |
| SO | Straight Ogival End |
| EX | Special Shape |
| BR | Ball Round |
| BC | Ball Collar Type |
| DI | Double Inverted Cone |
| SI | Single Inverted Cone |
| WR | Wheel Round Edge |
| CR | Inlay Preparation |
| CD | Childern's Dentistry |
| S | Short Shank |
| SS | Super Short Shank |
Description
1. Dental Diamond Burs for F.G.
2. Made of natural diamond powder with high hardness to guarantee the sharpness of burs
3. The shanks are made of top-grade stainless steel, which are hard and tensile and don't break or bend easily or never rusty.
4. Use for cutting, polishing teeth or other mental or plastic materials
5. The diamond burs are consist of shank and working head .
6. The shank is made of stainless steel,the working head is electroplated with Nickel titanium and diamond grit .no sterilization.
Strong Point
1. Sharp, resistant to abrasion, saving of time and money.
2. High-quality special burs for the anterior and posterior teeth respectively.
3. Small damage to the handpiece.
4. Feather-like shoulder won’t happen during the preparation of the shoulder so that the phenomenon of ceramic fracture of the margin or that the prosthesis can’t be in place due to the teeth preparation will be avoided.
5. The widths of the shoulder are consistent.
6. The gingiva won't be destroyed when grinding the teeth, relieving the pain of patients.
Dental Diamond Bur
1.Burs for rough wear. The thick-particle burs is used for mass operation.
2.Burs for fine wear. Burs is used for wearing and polishing surface of the prepared tooth.
3.Short shank diamonds For the opening of a smaller, particularly in the areas of the molar teeth preparation or fat pad in patients with abnormal hypertrophy of the molar teeth preparation area.
4.Long shank diamond points. For clinical crown longer gingival 1 / 3 prepared tooth area.
5.Shoulder burs. Such burs only in its design at the top end of dianmond particles for dressing the prepared tooth neck margin shoulder
6.Diamond burs with slender instrument and long, narrow neck Guarantee better exposure operation vision, dental prepared accurately to the deep dentin transition, ensure minimum damage to the teeth.
Specification
| Material | high hardness stainless steel and diamond powder |
| Color | color code |
| Type | TF-11,TF-12,TF-13,TF-14,TF-20,TF-21,TR-11,TR-12,TR-13,TR-14,T-19,TC-11,TC-21,TC-26,FO-11,FO-25,FO-27,FO-32,SF-11,SF-12,SO-20,SO-21,SR-11,SR-12,SR-13,EX-26,BR-41,SI-47,TR-11F,TC-11F,TC-21F .etc. |
| Size | all size are available |
| Package | 5pc/plastic bag : 5cm x 4.8cm;10pc/blister card : 10.4cm x 7.8cm; |
| OEM | OEM printing available |
| Certificates | CE, ISO available |
| Standard Sand | Head length 0.8-10.0mm |
| Super Coarse Sand | Head length 1.4-10.0mm |
| Coarse Sand | Head length 1.8/19.0 ,1.6/19.0, 3.6/17.0 8.0/22.06.5/21.0 |
| Fine Sand | Head length 0.8/19.0, 6.0/21.0, 8.0/22.0 , 10.0/22.0 .etc |
Advantage
1. Raw material selection: Use the high-strength, high-hardness stainless steel as the substrate of the burs. The highly advanced high-speed CNC lathe was used to make the raw materials so that concentricity, varying diameters of the shanks won’t happen. Use high-sharpness, high-hardness diamond as the raw material because it has a long service time, and it won't be painful for patients to use, and won’t damage the high-speed handpiece. There are 5 types according to the sizes of diamond grits: standard type 106-125µ, slightly thin type 53-63µ, extra thin type 20-30µ, extra thick type, extremely thick type 150-180µ.
2. Advantages of cost effectiveness: low in price, the price of each bur is just one fourth of that of European and USA products, but the quality are same.
3. Strict quality control: the use of CNC system and special devices ensure the quality stability. Each batch of burs must pass the performance test to ensure the quality of the burs sold to customers.
4. Development capabilities: the products of our factory are commonly used types. We can also produce other types according to the samples customers offered.
Except dental high speed burs and low speed burs, we also have carbide burs, porcelain burs.
Main advantages
1. Raw material selection: Use the high-strength, high-hardness stainless steel as the substrate of the burs. The highly advanced high-speed CNC lathe was used to make the raw materials so that concentricity, varying diameters of the shanks won’t happen. Use high-sharpness, high-hardness diamond as the raw material because it has a long service time, and it won't be painful for patients to use, and won’t damage the high-speed handpiece. There are 5 types according to the sizes of diamond grits: standard type 106-125µ, slightly thin type 53-63µ, extra thin type 20-30µ, extra thick type, extremely thick type 150-180µ.
2. Advantages of cost effectiveness: low in price, the price of each bur is just one fourth of that of European and USA products, but the quality are same.
3. Strict quality control: the use of CNC system and special devices ensure the quality stability. Each batch of burs must pass the performance test to ensure the quality of the burs sold to customers.
4. Development capabilities: the products of our factory are commonly used types. We can also produce other types according to the samples customers offered.
Except dental high speed burs and low speed burs, we also have carbide burs, porcelain burs.
