Shenzhen Rogin Medical Co., Ltd
Shenzhen Rogin Medical Co., Ltd Professional Manufacturer and supplier of dental instruments
Add to Cart
500 W Dental Lab Model Trimmer Dental Laboratory Equipment with Diamond
Description :
1. Motor Support
2. Motor
3. Abrasive disc
4. Protective case
5. Tightening screws of the abrasive disc
6. Working platform
7. Adjusting screws of the working platform
8. Power switch
Model Trimmer is widely used in restorative dentistry.It is a necessary tool for trimming plaster models,This machine is made of rust-proof all-cast aluminum.The angle can be adjusted between 0-20° which enables the users to achieve perfect trimming quality.
Specifications :
| Power supply voltage | < A > 220V / 50HZ ± 10% < B > 110V / 60HZ ± 10% |
| Power | 500W |
| Water pressure | 0.5 - 2kg |
| Rotation | 2800rpm |
| Weight | 20kg |
| Packing size | 44 x 35 x 35 cm |
Instruction :
1. Unpack the package,check if all the accessories are inside.Read this manual carefully before using
2. Fix the model trimmer to bench with one screw on each leg to avoid shaking
3. The tighten the water pipe and the joint tightly to avoid breaking off,which might cause water splashes and damage the motor
4. Tighten all the screws on the machine to avoid shaking
5. Turn on the power,notice if there any noise in the motor and check if the abrasive disc,change the water pressure if the result is not good
6. Input water
7. The trimmer can be adjusted which makes it easy and convenient .The angles can be adjusted by more than 30 °, the trimmer angle can be with 75 °-105 °
Attention :
1. Water pressure ≤ 2kg / cm
2. Do not use the machine without water,otherwise it will damage.
